WMF KULT X Gebrauchsanweisung Seite 10

*) The temperatures of the heated foodstuffs may deviate from those shown here as the temperatures
are dependent on the cookware used, amongst other factors.
Operating procedure
The induction hob offers 3 different functions:
▪ Use of the power levels 1-8 without timer function
▪ Use of the power levels 1-8 with timer function
▪ Using direct select programmes (8)
Use of the power levels (7) without timer function
Action
Plug the appliance in. Appliance is in standby mode.
Tap the On/Off button; appliance is in operational readiness
mode
Position the pan on the hob.
Set the desired power level 1-8.
Tap the Start/Pause button. Cooking process starts.
The "Appliance in use" symbol is shown in the display
Adjust the power level as required, e.g. when the boiling
point is reached.
If necessary, tap the Start/Pause button again:
- Cooking process is paused
- The "Appliance in use" symbol disappears
- Start/Pause LED fl ashes
- Tap on the Start/Pause button to resume the cooking
process
Switching off the hob by pushing the On/Off button twice.
Note: The fan runs on for a few seconds.
Pull out plug.
Note: If the induction hob is in pause mode it switches itself to standby automatically after 10
minutes if the control panel is not operated.
Use of the power levels (7) with timer function
Action
Plug the appliance in. Appliance is in standby mode.
Tap the On/Off button, appliance is in operational readiness
mode.
Position the pan on the hotplate.
Set the desired power level 1-8.
Set the timer with +/- buttons.
Tap the Start/Pause button. Cooking process and Timer
starts. The "Appliance in use" symbol is shown in the display
Change the power level if required
18
Touch button Display
Touch button Display
Action
If necessary, tap the Start/Pause button again:
- Cooking process and Timer is paused
- The "Appliance in use" symbol disappears
- Start/Pause LED fl ashes
- Tap on the Start/Pause button to resume the Cooking
process and Timer
Once the defi ned timer time has elapsed, the appliance
switches automatically to operational readiness mode.
After one minute, the appliance switches automatically to
standby mode.
Alternatively, press the On/Off button.
Note: The fan runs on for a few seconds.
Pull out plug.
Note: If the induction hob is in pause mode it switches itself to standby automatically after 10
minutes if the control panel is not operated.
Using direct select programmes (8)
Action
Plug the appliance in. Appliance is in standby mode.
Tap the On/Off button; appliance is in operational readiness
mode
Position the pan on the hotplate.
Select programme. For example "Cooking/Steaming".
Adjust the power level if required.
Adjust the timer with + / - if required.
Tap the Start/Pause button. Cooking process and Timer
starts. The "Appliance in use" symbol is shown in the display
If necessary, tap the Start/Pause button again:
- Cooking process and Timer is paused
- The "Appliance in use" symbol disappears
- Start/Pause LED fl ashes
- Tap on the Start/Pause button to resume the Cooking
process and Timer
Once the defi ned timer time has elapsed, the appliance
switches automatically to operational readiness mode.
After one minute, the appliance switches automatically to
standby mode.
Alternatively, press the On/Off button.
Note: The fan runs on for a few seconds.
Pull out plug.
Note: If the induction hob is in pause mode it switches itself to standby automatically after 10
minutes if the control panel is not operated.
Additional instructions for use
You can change the cooking parameters at any time while cooking:
▪ Change the power level using the power level controller (within the range of the predefi ned
programme (8). See Programme table).
Touch button Display
Touch button Display
19