LG KE970 Bedienungsanleitung Seite 204

GPRS attach
(Menu 9.4.2.2)
You can set GPRS service depending on various
situations.
Power on: If you select this menu, the phone is
v
automatically registered to a GPRS network
when you switch the phone on. Starting a WAP
or PC dial-up application created the connection
between phone and network and data transfer
is possible. When you end the application,
GPRS connection is ended but the registration
to the GPRS network remains.
When needed: If you select this menu, the
v
GPRS connection is established when you
connect a WAP or application service and
closed when you end the WAP or applicaion
connection.
Network profile
(Menu 9.4.2.3)
v Data connections
• Name: You can type the network name.
• Bearer: You can set the bearer data service.
1 Data/2 GPRS
<Data settings>
Appears only if you select Data Settings as a
Bearer/service.
- Dial number: Enter the telephone number to
dial to access your WAP gateway.
- User ID: The users identity for your dial-up
server
(and NOT the WAP gateway).
- Password: The password required by your
dial-up server (and NOT the WAP gateway) to
identify you.
- Call type: Select the type of data call;
Analogue or Digital (ISDN).
- Call speed: The speed of your data
connection; 9600 or 14400 (Depends on
Operator)
- Linger time: You need to enter timeout
period.
After entering that, the WAP navigation
service will be unavailable if any data is not
input or transferred.
- Primary server: Input the IP address of the
primary DNS server you access.
- Secondary server: Input the IP address of the
secondary DNS server you access.
<GPRS settings>
The service settings are only available when
GPRS is chosen as a bearer service.
- APN: Input the APN of the GPRS.
- User ID: The users identify for your APN
server.
- Password: The password required by your
APN server.
- Primary server: Input the IP address of the
primary DNS server you access.
- Secondary server: Input the IP address of the
secondary DNS server you access.
41