Channel Scan; Keypad Lock - UCOM TWINTALKER 3600 Bedienungsanleitung

Display

12.8 CHANNEL SCAN

CHANNEL SCAN performs searches for active signals in an endless loop
from channel 1 to 8, including CTCSS codes.
12.8.1 Activate channel scan
• Press the
• Press the
vate scanning.
• Press the
• When activity on one of the 8 channels is detected the channel scan
will stop and you can listen to the conversation on this channel.
• Press the
• If no button is pressed and no activity has been detected, the channel
scan will continue automatically after 5 seconds.
12.8.2 De-active channel scan
• Press the
• Press the
activate scanning.
• Press the
12.9 KEY PAD LOCK
12.9.1 Activate key pad lock
• Press the
• Press the
The key pad lock icon is displayed.
12.9.2 De-activate key pad lock
• In key pad lock mode, press the
• A beep will confirm the deactivation and the key pad lock icon will dis-
appear.
UCOM TWINTALKER 3600
- button four times.
- button or the
- button to confirm your selection.
PTT
- button or the
You can not change the speaker volume in
channel scan mode.
- button four times.
- button or the
- button to confirm your selection.
PTT
- button five times.
- button or the
Only the - button and the
work when keypad lock is activated.
UCOM TWINTALKER 3600
- button, until 'Y' is displayed, to acti-
- button to skip the channel.
- button, until '-' is displayed, to de-
- button to activate the key pad lock.
button will
PTT
- button for 3 seconds.
25