Channel Monitor; Roger Beep On/Off - UCOM TWINTALKER 3600 Bedienungsanleitung

UCOM TWINTALKER 3600

12.10 CHANNEL MONITOR

This functions allows you to monitor a set channel and CTCSS code for 15
seconds for any activity.
12.10.1 Activate monitor mode
•
•
•
12.10.2 De-activate monitor mode
•

12.11 ROGER BEEP ON/OFF

After the
confirm that you have stopped talking.
To disable the roger beep.
•
•
To enable the roger beep, follow the same instructions.
26
Press the - button six times to start monitoring the channel acti-
vity, The set channel and CTCSS code is displayed.
Press the - button to increase or the
speaker volume level.
Channel monitor automatically stops after 15 seconds
In monitor mode, press the
activate the monitor mode or wait 15 seconds for monitoring to stop
automatically.
- button is released, the unit will send out a roger beep to
PTT
Turn the units off (§12.1)
Press and hold the
- button or the
- button while turning the unit on. (§12.1)
- button to decrease the
- button to de-
PTT
UCOM TWINTALKER 3600