Clearaudio Tracer Bedienungsanleitung Seite 6

User manual / Bedienungsanleitung
Ensure that the distance from the spindle to the pivot point of the tonearm is exactly 222 mm.
Moving the armboard in one direction or another will allow you to locate the correct position.
You can also use optional the Clearaudio
(Art. No.: AC005/IEC
Pic. 4: Distance from pivot to spindle
You can now mount the cartridge.
VTA adjustments are accomplished by loosening the two VTA lcok screws on the side of the
armboard base (shown in picture 5 below). Once loose, you can move the arm up or down to
achieve the desired VTA. Always ensure that you adjust the VTA such that the tonearm tube is
parallel to the turntable chassis. Tighten the screw when finished.
Pic. 5: VTA adjustment
6
www.analogshop.de ).
cartridge alignment gauge
© clearaudio electronic GmbH, 2018/05