Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User manual / Bedienungsanleitung
Tracer
2.
tonearm mounting
To mount the tonearm base on your armboard, please use the hex screws provided (M4 x 10) as
shown in Pic.1 No. 5 (page 4).
Pic. 2: Mount tonearm base
Carefully thread the cables and the tonearm through the armboard, taking care not to damage any
wires. Now secure the tonearm using the two VTA lock screws on the right and the left side, but not
too tight so that you can adjust the VTA in the next step.
Pic. 3: Threading the tonearm through the armboard
Made in Germany
5
Werbung
Kapitel
Inhaltsverzeichnis
