Technical Specifications; General Power Tool Safety Warnings; Electrical Safety - Sparky Professional HeavyDuty BVR 62E Originalbetriebsanleitung

Technical specifications

Model:
▪ Power input:
▪ No load speed:
▪ Tool holder:
▪ Maximum torque:
▪ Overall length:
▪ Weight (EPTA procedure 01/2014):
▪ Safety class (EN 60745):
Noise and vibration information
▪ Noise emission (measured values determined according to EN 60745):
A-weighted sound pressure level L
Uncertainty К
pA
A-weighted sound power level L
Uncertainty К
wA
Wear hearing protection!
▪ Vibration emission (determined according to 6.2.7 EN 60745-1):
Total vibration values (vector sum in the three axes) determined according to EN 60745
Vibration emission value a
Uncertainty K
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for dif-
ferent applications, with different accessories or poorly maintained, the vibration emission may differ. This may signifi-
cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce the harmful effect
of vibrations.
General power tool
safety warnings
WARNING! Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
Original instructions
pages-BVR6xE-2017.indd 3
pA
wA
h
reference.
BVR 62E BVR 64E
705 W 705 W
0–2500 min 0–4000 min
-1
6.35 mm (1/4") 6.35 mm (1/4")
22 Nm 15 Nm
312 mm 297 mm
1.6 kg 1.6 kg
II II
82 dB(A) 82 dB(A)
3 dB 3 dB
93 dB(A) 93 dB(A)
3 dB 3 dB
< 2.5 m/s < 2.5 m/s
2
1.5 m/s 1.5 m/s
2
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.

2. ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
BVR 66E
705 W
0–6000 min
-1
6.35 mm (1/4")
8 Nm
297 mm
1.6 kg
II
82 dB(A)
3 dB
93 dB(A)
3 dB
< 2.5 m/s
2 2
1.5 m/s
2 2
3
14.6.2017 . 9:41:13
-1
EN