HQ Power VDP3000ST Bedienungsanleitung Seite 6

• DMX Control Modes
DIP switch 10 must always be set to OFF.
• Mode Setting
The remote controller is powered through the master fixture. Set DIP switches 2 and 3 to ON to select
the master fixture. Connect the slave fixtures and set DIP switch 2 to ON.
1 2
↓
ON
MASTER mode
16.03.2010
3 4 6
VDP3000ST
8
↓
ON
6
1 2 3
SLAVE mode
Rev 01
4 5 6
©Velleman nv