HQ Power VDP3000ST Bedienungsanleitung Seite 4

5. Use
• Detailed DMX Values per Channel
Channel Function
1 INTENSITY
2 FLASH DURATION
3 FLASH RATE
4 EFFECTS
INTENSITY: Set the flash intensity from minimum (blackout) up to maximum using the intensity fader.
The maximum intensity is reduced in low power mode.
FLASH RATE: Set the flash rate from 0 to 25 flashes per second using the flash rate fader. Switch the
flashing on and off with the run/stop button (red LED when switched on, green LED when switched off).
CHASE/SYNC: The chase/sync button toggles between staggered and simultaneous flashing of multiple
fixtures. The LED blinks in chase mode and remains steady in sync mode.
BLINDER EFFECT: The blinder effect is controlled through the momentary blinder effect button. The
lamp power is electronically regulated to prevent the lamp from overheating.
SINGLE FLASH: Press the single flash button to select the single flash mode with continuous flashing
stopped. The flash rate cycle can be restarted by pressing the single flash button while continuous
flashing is running.
• DMX512 Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to
the male 3-pin XLR input of the VDP3000ST. Multiple VDP3000STs can be linked through serial linking.
The linking cable should be a two-core screened cable with XLR input and output connectors.
• DMX512 Chain with Termination
• DMX Start Address
16.03.2010
VDP3000ST
From To
0 5
6 255 Intensity from 0 ~ 100%
0 255 From 0 ~ 530ms
0 5
6 255 From 0.6 ~ 30Hz
0 5
6 42
43 85
86 128 Ramp up-down
129 171 Random
172 214 Lighting
215 255 Spikes
A DMX terminator is recommended for installations where the DMX cable has to
run a long distance or is in an electrically noisy environment (e.g. discos). The
terminator prevents corruption of the digital control signal by electrical noise.
The DMX terminator is simply an XLR plug with a 120Ω resistor between pins 2
and 3, which is then plugged into the XLR output socket of the last device in the
chain.
Please see illustration.
Description
Blackout
No rate
No effect
Ramp up
Ramp down
4
Rev 01
©Velleman nv