Trotec BL 30 Bedienungsanleitung Seite 13

Contents
1 .Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . B.-.1
2 . . Functions.and.specifications. . . . . . . . . . . . . . . . B.-.1
3 . . Special.features. . . . . . . . . . . . . . . . . . . . . . . . . B.-.2
4 . . Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B.-.3
5 . . Software.installation. . . . . . . . . . . . . . . . . . . . . . B.-.5
This.publication.replaces.all.previous.versions . . No.part.of.this.publication.may.be.reproduced.or.processed,.
copied.or.distributed.via.electronic.means.in.any.form.whatsoever.except.with.our.written.permission . . We.
reserve.the.right.to.make.technical.changes . . All.rights.are.reserved . . Trademarks.are.used.in.the.following.
without.any.guarantee.of.their.free.usability.and.are.basically.as.the.manufacturer.describes.them . . The.
trademarks.used.are.registered.and.should.be.treated.as.such . . The.right.to.make.design.alterations.in.
the.interests.of.continuous.product.improvement.and.alterations.to.the.shape.or.colour.is.reserved . . The.
package.contents.may.differ.from.the.product.illustrations . . This.document.has.been.prepared.with.the.
appropriate.care . . We.can.accept.no.liability.for.any.errors.or.omissions . © .TROTEC®
1. Introduction
The.temperature.and.humidity.data.logger.is.a.particular-
ly. sturdy,. high-precision. measuring. instrument,. which. is.
characterised.by.its.fast.response.time . . The.data.logger.is.
already.used.in.many.places.to.monitor.both.the.ambient.
temperature. and. the. relative. humidity. and. to. collect. me-
aningful.measurement.data .
2. Functions and technical specifications
The.data.logger.is.a.particularly.efficient.and.handy.measu-
ring.instrument,.which.is.particularly.suitable.for.longer.las-
ting.measurement.assignments . . The.measurement.results.
are.stored.in.the.data.logger.and.transferred.to.the.PC.via.
a.USB.cable . . The.data.can.subsequently.be.read.out.on.the.
PC . . The.display.shows.the.current.MAX,.MIN,.TIME,.DATE,.
temperature.and.humidity.values .
m Moving the appliance from a cold to a warm
OPERATING INSTRUCTIONS - CLIMATE DATA LOGGER BL30
environment (and vice versa) can lead to the
formation of condensation on the measuring
circuitry of the appliance. This physical effect,
which cannot be prevented by structural me-
ans for any measuring instrument, leads to
false measurement values. Depending on the
temperature difference, the appliance requi-
res an ‚acclimatisation time' of approx. 15 - 30
minutes before the measuring procedure can
be resumed.
B - 1