Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Programming
Programming is carried out in the same way as with a mechanical timer. Programming can be done in either mains or battery power mode.
After setting a program, press the OK button
1 minute during programming, the current program will be saved.
EXIT
TIME
DATE
SU WI
PROG
³
Virtually turn the dial to select the switch-on time first, e.g. Monday 06.15
Use
to select the hour, in this case 6. Then use
Use
to enable the switch-on period, e.g. Monday 6:15 until Monday 10:00
Hold down the 5-way switch
Use
to alter the switch-on period.
Turn the button
to reduce the switch-on period (OFF) or
Program all the other switching times.
The day changes at 00:00 hours.
Confirm the setting.
Altering/deleting programs
EXIT
TIME
DATE
EXIT
SU WI
TIME
PROG
DATE
SU-WI
PROG
Testing
Display the switching times from Monday to Sunday.
Each upward movement of the 5-way switch moves the display to the next switching state change. After the last switching state change in a
week, the display shows PROG END.
EXIT
TIME
DATE
SU WI
PROG
to save it and view it in the program overview (see page 1). If no buttons are pressed for
EXIT
0
TIME
12
DATE
SU-WI
24
PROG
OFF
to program in 15-minute increments.
1 2 3 4 5 6 7
0
12
24
ON
OFF
1 2 3 4 5 6 7
TIME
0
DATE
12
SU WI
PROG
24
TEST
OFF
1 2 3 4 5 6 7
ON
to set the minutes.
to extend the switch-on period (ON).
1 2
³
Select the switching time
Use
to alter the switch-on period.
Turn the button
to extend the switch-on period (ON).
Confirm the setting.
1 2 3 4 5 6 7
0
12
24
OFF
ON
ON
28 programs have been
stored. No more programs
MEMO
can be added.
FULL
1 2 3 4 5 6 7
0
0
12
12
24
24
OFF
ON
OFF
Sunday 23:00
Monday 0:00 Uhr
and
.
to reduce the switch-on period (OFF) or
PROG
NO
END
PROG
1 2 3 4 5 6 7
0
12
24
OFF
ON
1 2 3 4 5 6 7
0
12
24
OFF
ON
6 7
1 2 3 4 5 6 7
ON
No program set
Werbung
