Herunterladen Inhalt Inhalt Diese Seite drucken

Before Initial Use; Initial Operation; Using The Unit - Clatronic RK 3566 Bedienungsanleitung, Garantie

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Rice Quantity
With this device you can boil a maximum of 1.3 kg of rice
(gross weight). For this you require 2.7 litres of water.
Depending on the type of rice, this will provide you with
approximately 3.0 kg of boiled rice with a cooking time of
approx. 45 min.
The minimum quantity of rice for boiling is 400 g (3 CUPs),
which will provide you with approx. 650 g of boiled rice,
depending on the type of rice used.
Rule of thumb: Use 2 parts of water with 1 part of rice.
Check the packaging of your rice product for information on
the exact quantity ratio.
ON / OFF switch
Connect the device to the mains supply.
When the ON / OFF switch is in the ON position, the appli-
ance is operational. The POWER indicator lights up.
The appliance is turned off when in the OFF position.
Function Switch
When the function switch is switched towards the top, the appli-
ance will stay in the operational condition "Keeping warm". The
indicator lamp WARM is lit.
With the function switch you can change over to the mode
"Cooking". This is only possible if the rice pot is correctly
inserted and the switching contact (in the middle of the hot
plate) therefore properly connected. The indicator lamp
COOK is lit.
Cooking time
Once the water has fully evaporated in the rice pot, the ap-
pliance switches automatically to "Keeping warm", ending
the cooking process. The indicator lamp WARM is lit.
Ending operation
Observe the following sequence:
1. Check if the indicator lamp WARM is lit. Push the function
switch upwards, if applicable.
2. Set the power switch to the OFF position.
3. Disconnect the power plug from the outlet.

Before Initial Use

Remove the packaging.
Check the scope of delivery.
We recommend cleaning the appliance as described under
"Cleaning".

Initial Operation

Ensure that the ON / OFF switch is in the OFF position and
that the function switch is set to "Keeping warm".
Insert the plug of the connection cable into the appliance
first.
30
Electrical Connection
Before inserting the plug into the socket. Make sure that
the mains voltage to be used matches that of the device.
You can find this information on the nameplate.
Connect the device to a duly installed protective contact
socket.

Using the unit

Cooking rice
Prior to cooking rice, observe the manufacturer's notes on how
to prepare the rice, such as washing the rice prior to cooking, or
soaking certain varieties of rice.
1. Open the lid.
2. Insert the rice pot into the rice cooker.
3. Set the desired rice volume of between 3 to 10 CUPs with
the measuring cup and fill this volume into the rice pot.
4. Fill the rice pot with water to the respective mark on the
CUP.
5. Close the lid.
6. Make the electric connection as described in "Initial Opera-
tion". Turn the appliance on with the ON / OFF switch (ON).
The WARM control light is on.
7. Press down the function switch. The WARM control light
goes out and the COOK light goes on.
8. Once the water has completely evaporated in the rice pot,
the appliance will switch automatically to "Keeping warm",
thus ending the cooking process. The COOK control light
goes out and WARM goes on.
TIP: Leave the rice for a further 5 minutes prior to draining
it from the pot.
9. Carefully open the lid.
WARNING:
Risk of steam burns. Hot steam may escape.
Steaming
Steaming is a gentle way to cook food using hot water steam.
This maintains more valuable nutrients in the food compared
with other methods of cooking. To steam food, use the steam
insert.
1. Open the lid.
2. Insert the rice pot into the rice cooker.
3. Pour the minimum quantity of water as stated in the follow-
ing table into the rice pot.
4. Place the steam insert into the rice pot.
5. Place your food into the steam insert.
6. Close the lid.
7. Make the electrical connection as described under "Initial
Operation". Turn the appliance on at the on/ off switch (ON).
The WARM control light goes on.
8. Press down the function switch. The WARM control light
goes out and the COOK light goes on.
9. Check the cooking status occasionally.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rk 3567

Inhaltsverzeichnis