Attachments; Technical Data - Heidolph MR Hei-Standard Betriebsanleitung

Attachments

Technical data


MR Hei-Standard, MR Hei-Tec, MR Hei-Connect
Supply power
Power consumption (W)
Protection class (DIN EN 60529)
Drive
Overheat protection
Operating mode
Speed range (rpm)
Speed accuracy (%)
Stirring capacity, max (H 2 O) (l)
Temperature control
Heating power (W)
Hotplate temperature (° C)
Accuracy hotplate (° C)
Safety circuit hotplate (° C)
External sensor
Pt 1000 temperature max. (° C)
Temperature accuracy with external
temperature sensor (° C)
Safety circuit hotplate via
temperature sensor Pt 1000 (° C)
Load capacity, max. (kg)
Plate diameter (Ø) (mm)
Dimensions (l x w x h)
Weight (kg)
Permissible ambient conditions
Model
Interface
Speed setting
Accuracy temperature setting (° C)
* Accuracy determined with following parameters: 800 ml water in 1 l beaker, form H according to DIN 12 331;
temperature 50 °C; magnetic stirring bars 40 mm; speed 600 rpm; sensor depth 60 mm.
Attachments
230 V (50/60 Hz)
820
IP 32
EC-motor
no
continuous
100 - 1,400
±2
20
Micro controller
800
20 - 300
±5
>25 set temperature hotplate
Pt 1000
300
±1
>25 set temperature Pt 1000
25
145
(mm) 277 x 173 x 94
2.9
▪ 5 - 40 °C
▪ 80 % relative humidity, no condensation at
5 - 31 °C, linear decreasing to 50 % at 40 °C
Hei-Standard
analog
32
or 115 V (50/60 Hz)
or 620
or 600
MR MR
Hei-Tec
digital
±5 ±1
MR
Hei-Connect
RS 232
digital
±1