Heidolph MR Hei-Standard Betriebsanleitung Seite 22

Operation
Connect interfaces
A fi tting interface cable is optionally available.
The interface cable should not exceed a length of 2.80 m.
A longer cable might lead to transmission errors.
✓ The device is switched off.
➜ Insert the plug of interface cable into the interface of the stirrer.
➜ Insert the other end into the interface on your PC.
Warning: Remote-controlled start!
Risk of injury!
Sudden rotation of stirring bars at high speed can lead to breakage of
beakers.
Always ensure sample with stirring bars is placed on device before
starting any process.
Risk of scalding!
The heating plate reaches up to 300 °C! You might get serious-
ly burned.
Avoid direct body contact with heating plate or samples placed on
top of it when hot. Wear appropriate safety clothes in the vicinity of
device.
Every user must be aware of the potential risk of injury.
Link interfaces
✓ The PC is switched on.
➜ Switch ON the overhead stirrer.
➜ Start rotation via PC.
✓ The communication link between PC and stirrer is completed.
✓ The stirrer is switched to remote-operation.
✓ All commands are solely executed via PC.
✓ Only heating button and rotation button are still active to end a running process.
✓ You can always switch OFF the unit via the ON/OFF button on the stirrer.
22