Using Oven Controls - ACP 20152601 Bedienungsanleitung

Manual Time Entry
To cook food using a specific time and power level.
1. Open oven door and place food in oven. Close door.
• READY displays. Fan and light will turn on.
2. Press TIME ENTRY pad.
• If pad does not work, open and close oven door and try
again.
3. Enter cooking time by using the numbered keypads.
4. Press POWER LEVEL pad to change power level.
• To change the microwave's power, press pads 1 (for
10%) through 9 (for 90%).
5. If stage cooking is desired, press STAGE and repeat steps
2 through 4.
• Up to four different stages can be programmed.
6. Press START pad.
• Oven operates and time counts down.
7. At end of cooking cycle oven beeps and shuts off.
DONE displays.
Preprogrammed Pads
Cooking food using preprogrammed keypads.
For instructions on programming keypads, see page 10 of the Programming
Oven Controls section of this manual.
1. Open oven door and place food in oven. Close
door.
• READY displays. Fan and light will turn on.
2. Press desired pad.
• For single pad entry, press only one pad.
• For double pad entry, press the two pads representing the two digits.
• To change single or double pad entry option
see User Options section in this manual.
3. When cooking two of the same food item, press the QUANTITY pad
before a preprogrammed cook cycle. The oven will automatically adjust
the program.
• Display will read, "DOUBLE."
• To clear, open and close the door or press the STOP pad
3. Oven begins to cook.
• For additional cooking time, press preprogrammed number pad again.
4. At the end of the cooking cycle oven beeps and shuts off. DONE displays.
Part No. 20152601
Printed in U.S.A. 8/15
Original Instructions
Factory Settings
Using the Oven Controls
Microwave Cooking
Microwave cooking uses high
frequency energy waves to heat the
food. When cooking, microwave
energy causes food molecules to
move rapidly. This rapid movement
between the food molecules creates
heat, which cooks the food.
0
Is it safe to run a
microwave if it is empty?
1
2
Running a microwave without a
3
4
load can cause serious damage to
electrical components. When food
is placed in the oven, microwave
energy generated by the magnetron
is absorbed by the food. When
no food is in the oven, there is
nothing to absorb the energy. The
energy bounces around the cavity
and is channeled back through
the waveguide. This can cause
arcing, fire and may burn out the
magnetron.
1
How do you defrost
food while using a
commercial microwave?
Not all commercial microwaves have
the defrost button that is commonly
found on a residential microwave. To
defrost, simply use 20% microwave
power level.
X2
How do you know if a
container is microwave
safe?
To test if a container is microwave
safe, place it in the microwave next
to a container of water that is micro-
wave safe. Run the microwave for
one minute. If the tested container
is warm or hot, it is not microwave
safe.
9  2015 ACP, Inc.
Cedar Rapids, Iowa 52404