BOMANN DU 622.1 Bedienungsanleitung, Garantie Seite 22

• To clean the surface of the housing, use a mild
• The appliance can be used again after The appliance can be used again after everything has dried properly.
• If you use your extractor hood in recirculation mode, you must
(see "Replacing the activated carbon
Cleaning the aluminum grease filter Cleaning the alumin Cleaning the alumin Cleaning the alumin um grease filter um grease filter (depending on the model) um grease filter
WARNING: Risk of fire! WARNING: Risk of fire!
WARNING: Risk of fire! WARNING: Risk of fire!
Grease residues in the aluminum grease filter may ignite on exposure to high te Grease residues in the alumin
peratures. It is therefore important that the grease filter is regularly cleaned / r
placed.
Grease and vapours collect in the filter
clean the grease filter monthly:
• Remove the aluminum grease filter
tly and pull out towards the front.
• Rinse the grease filter in a solution
tion.
• Then clean with a soft brush, rinse
• Alternatively, the grease filter can
occur in the dishwasher. This does
Replacing the activated carbon filter Replacing the activated Replacing the activated Replacing the activated
The activated carbon filter mat absorb
use. Order the carbon filter mat from
der, use the reference number found
• See "Installing the activated carbon
• Remove and dispose the old carbon filter
CAUTION: CAUTION:
CAUTION: CAUTION:
The carbon filter mats must not be washed and reused! The carbon filter mats must not be washed and
Replacing the lighting Replacing the lighting Replacing the lighting Replacing the lighting
WARNING: WARNING:
WARNING: WARNING:
Allow the lamp to cool before replacing
• Use the correct lighting: 1 1 1 1 x x x x 28
Remove the grease filter grid or aluminum grease Remove the grease filter grid or aluminum grease filter (depending on the model)
•
Remove the faulty bulb and screw in new bulb. Remove the faulty bulb and screw in new bulb.
•
Reinstall the grease filter grid or aluminum grease filter. Reinstall the grease filter grid or aluminum grease filter.
•
housing, use a mild detergent and a soft cloth to prevent scratching.
tractor hood in recirculation mode, you must replace the activated
bon filter").
(depending on the model) (depending on the model) (depending on the model) (depending on the model) (depending on the model) (depending on the model) (depending on the model)
um grease filter may ignite on exposure to high tem-
important that the grease filter is regularly cleaned / r important that the grease filter is regularly cleaned / re-
filter and may accumulate if not regularly cleaned. We
filter by sliding back the lock in the handle recess,
solution of hot water and neutral detergent. Soak the
rinse thoroughly with hot water and leave to dry.
can also be cleaned in the dishwasher (up to 60°C).
does not affect the function of the grease filter.
carbon filter carbon filter carbon filter mat mat mat mat
absorbs odours and must be replaced at least every six
from your dealer or in our online accessories shop,
found under "Technical Data".
carbon filter mat for recirculation mode".
carbon filter mat.
placing the lighting. Risk of burns!
28 28 W W W W 28 W W W W (Type E14) (Type E14) (Type E14) (Type E14)
or in our online accessories shop,
Risk of burns! Risk of burns! Risk of burns!
(depending on the model).
22
vent scratching.
vated carbon filter regularly
cleaned. We recommend that you
cess, push the filter down gen-
the grease filter in the solu-
60°C). Slight discoloration may
six months, depending on
www.bomann.de. To or- www.bomann.de
www.bomann.de www.bomann.de