Kärcher BP 3 Home & Garden Bedienungsanleitung Seite 27

Fault
Pump transports is re-
ducing or transported
quantity is too low
Our Kärcher branch will be pleased to help you further in the case of questions or faults.
See address on the reverse.
BP 3 Home & Garden
BP 4 Home & Garden
eco!ogic
BP 5 Home & Garden
BP 7 Home & Garden
eco!ogic
Cause
Suction pipe blocked
Pre-filter is dirty
Suction side is leaky
The quantity transported
by the pump depends on
the transport height and
the connected periphery
Cross section on the de-
livery side constricted,
e.g. due to valve/ball
valve that is not com-
pletely opened.
Hose on the delivery
side is kinked.
Notes on the operation
Irrigation
500 m max.
2
800 m max.
2
1000 m max.
2
1200 m max.
2
Remedy
Switch off the pump, pull the mains plug
and clean the intake area.
Remove the pre-filter and the check valve
and clean it under running water, flush dirt
residues from the bottom of the filler neck
through the filler hole if necessary.
Check the entire suction side for leaks
Keep max. flow height, see technical data.
If necessary, select a different hose diam-
eter or hose length.
Completely open the valve/ball valve.
Remove kinks from the hose.
Household water
supply
8 persons max.
10 persons max.
12 persons max.
12 persons max.
– 10
EN
Irrigation & house-
hold water supply
300 m + 4 persons
2
max.
600 m + 4 persons
2
max.
800 m + 4 persons
2
max.
900 m + 4 persons
2
max.
27