Care And Cleaning; Declaration Of Conformity (Doc) - Renkforce RF-TB240WW Bedienungsanleitung

Problem
Bluetooth name of the soundbar
®
does not appear on the mobile
device.
The soundbar buttons have no
function.

12. Care and cleaning

• The product does not contain any components that require maintenance. Never attempt to open or disassemble it.
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the
casing or stop the product from functioning properly.
• Turn the product off and disconnect the product from the power supply before cleaning.
• Use a dry, lint-free cloth to clean the product. Wipe the soundbar and the subwoofer occasionally with a dry cloth
to remove dust.

13. Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this product conforms to the
2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity: www.conrad.com/downloads
Select a language by clicking on a flag symbol, and then enter the product order number in the search box.
The EU Declaration of Conformity is available for download in PDF format.
Possible cause/solution
Make sure the soundbar is turned on.
Check to see if Bluetooth
Devices are not paired. Pair your mobile device with the soundbar (see
chapter "10. Operation" section "f) Bluetooth
Press the BT PAIR (27) button. The soundbar emits the audible message
"Pairing" (establishing a connection) and the Bluetooth
Unplug the mains adapter from the wall socket and plug it back in after about
3 minutes. Use the soundbar as usual.
is enabled on your mobile device.
®
mode" on page 39).
®
indicator is lit solid.
®
41