b) Bi-wiring operation
Open the jumpers after releasing the
four screw terminals on the back of
the speaker and connect the cables
according to the illustration.
c) Bi-amping operation
Open the jumpers and connect the
cables according to the illustration.
In bi-wiring / bi-amping operation, the
low frequencies are accessed via the
two lower screw terminals, medium
/ high frequencies via the two upper
screw terminals.
In these operating modes, ensure that the correct polarity is maintained and that you
remove the jumpers on the speaker terminal, otherwise this may cause damage to
your amplifier.
-
amplifier/
receiver
+
medium / high frequencies
-
amplifier/
receiver
+
low frequencies
-
amplifier/
receiver
+
EN
-
+
HI
-
+
LO
-
+
HI
-
+
LO
16