Safety Precautions - Vestamatic Markise Funk WS Montage- Und Bedienungsanleitung

83300811 G1.qxd 09.02.01
Markise Funk WS
(Awning radio control)
Installation and Operating Instructions
11:43 Seite 23

Safety precautions

· Please note that the Vestamatic Markise Funk WS (awning radio control)
requires an operating voltage of 230 VW, 50 Hz. Make sure to contact a profes-
sional electrician for the installation.
· Make sure to turn off the operating voltage before working on awnings or blinds that
are controlled by the Vestamatic Markise Funk WS (awning radio control).
· The control was designed for correct use as described in the operating instruc-
tions. Any changes or modifications thereof are not permissible and will result in
loss of all warranty claims.
· Check the Vestamatic Markise Funk WS (awning radio control) for any
signs of mechanical damage immediately after unpacking. If there is damage due
to the shipping, please notify the supplier immediately.
Do not start up the control in case there is any damage!
· If safe operation of the control, awning i.e. blinds can not be guaranteed, the
Vestamatic Markise Funk WS (awning radio control) must be turned off
immediately and protected against unintentional operation.
· Prior to recycling the radio transmitter of the Vestamatic Markise Funk WS
(awning radio control).the batteries must be removed from the device and re-
cycled in accordance with the regulations.
- 24 -
G