Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Follow the instructions for your Bluetooth
depending on the manufacturer and design.
• Press the on/off button (4) to turn the headset on and enable pairing mode. The LED
indicator (6) will flash alternately in red and blue.
• Select "JC-952B" on your audio device (e.g. mobile phone or laptop) to pair it with the
headset.
• The LED indicator (6) will flash blue when the devices are paired via Bluetooth
headset will play a notification tone.
• If pairing fails, turn off the headset and try pairing the devices again.
d) Wired audio playback
• If your audio device does not support Bluetooth
3.5 mm jack cable.
• Connect the analogue input (1) to the audio output (headphone socket) on your audio device.
The Bluetooth
connection will be interrupted and the LED indicator (6) will stop flashing.
®
• Start playback on your audio device.
• Use the controls on your audio device to control playback. The controls on the headset are
automatically disabled when the 3.5 mm jack cable is connected.
• The Bluetooth
connection is automatically terminated when the 3.5 mm jack cable is
®
inserted into an audio device.
e) Button functions
On headset
Button
Function
This button (3) skips to the next song in the playlist. Press and hold to increase
the volume.
On/off button: Press and hold for 3–5 seconds to place the headset in pairing
mode
.
Press to play or pause a song.
Press and hold for 3–5 seconds to switch the headset off.
Press to answer ( ) or end ( ) a call.
Press twice to dial the previous number ( ), or press once to stop dialling.
Press and hold for 3–5 seconds to decline an incoming call ( ).
This button (5) skips to the previous song in the playlist. Press and hold to
decrease the volume.
Multifunction button on the microphone
• Press once to play or pause a song.
• Press to answer or end a call.
• Press twice to skip to the next track in the playlist.
• Press three times within the first 3 seconds of a song to skip to the previous song in the
playlist.
• If the 3 second interval is exceeded, the current song will play again.
Some mobile devices do not support the button controls on the microphone. If your
mobile device does not support the button controls, control playback via your device.
f) Answering a phone call
• When the headset is paired with a mobile phone and you receive an incoming call, the current
track will be paused and the headset will play a ringtone.
• Press the on/off button (4) to answer the call.
• Press the on/off button (4) again to end the call. You can also use the onscreen controls on
your mobile phone to answer/end a call.
g) Troubleshooting
• If some features do not work properly, ensure that all of the necessary Bluetooth
installed and up-to-date.
• Some devices (e.g. smartphones) may not support the in-line remote features. Visit the
website of your smartphone manufacturer and check the list of features for your device
(the AVRCP protocol must be supported). Updating your device may help to resolve the
issue.
• If there is no sound, try increasing the volume. If the issue persists, re-establish the Bluetooth
connection or pair the devices again.
• If the sound is distorted, ensure that the audio device and headset are within 10 m of each
other and check that there are no sources of interference.
Care and cleaning
• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
• Do not immerse the product in water.
device to pair it with the headset. These may vary
®
, you can connect it to the headset using the
®
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol, and then enter the product order
, and the
®
number in the search box. The EU Declaration of Conformity is available for
download in PDF format.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste.
Always dispose of the product according to the relevant statutory regulations.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Input voltage ................................. 5 V/DC
Rechargeable battery ................... 3.7 V/DC, 300 mAh lithium polymer rechargeable battery
Transmission power...................... +2 dBm
Bluetooth
version ........................ 4.2
®
Supported standards .................... AVCTP1.0, AVRCP1.0, GAVDP1.2, AVDTP1.0, A2DP1.2,
Range ........................................... Approx. 10 m
Frequency range (acoustic) .......... 20–20000 Hz
Sensitivity ..................................... 105 ± 3 dB
Jack socket (aux-in) ...................... 3.5 mm
Speaker ........................................ 40 mm
Charging time ............................... 2–3 hours
Standby ........................................ 100 hours
Battery life ..................................... Approx. 9–10 hours (depending on the volume, type of
Operating/storage conditions ........ +10 to +50 °C, 40–85 % relative humidity (non-condensing)
Dimensions (L x W x H) ................ 156 x 70.5 x 184 mm
Weight .......................................... 175 ± 10 g
drivers are
®
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
Hands-Free Profile1.5, Headset Profile V1.1
music and call duration)
*1577240_v4_1217_02_DS_m_de_gb_(1)
Werbung
