Schwamborn ES 42 Bedienungsanleitung Seite 10

8. Fitting the tank
1. Place the tank on the lower control handle
holder
2. Fix it in place with the upper holder
3. Attach the cable to the left hand lever on the
control handle
4. Connect the liquid hose to the tank and insert it
to the side of the motor
9. Fitting shampoo accessory
ES 420/420S/420 duo/500)
(only on the
1. Place the tank on the lower control handle holder
2. Fix it in place with the upper holder
3. Attach the cable to the left hand lever on the
control handle
4. Connect the liquid hose to the tank and insert it
to the side of the motor
5. Mount the shampooing equipment and the fan in
the tank
6. Attach the shampoo nozzle under the machine
10. Maintenance and service
1. Always withdraw the
beginning servicing work.
2. Regularly check the mains plug and connecting
cable for functional safety.
3. Only trained electricians may work on electrical
components.
4. Clean the accessory
5. Regularly clean the spray device with water after
use.
6. Regularly wipe down the machine with a damp
cloth.
7. After work:
•
Do not leave the machine resting on the
accessory
•
This prevents them from becoming distorted
•
Distortions cause uneven running
•
Check the dust bag and filter
11. Fault-finding and rectification
1. The machine does not start
Cause
Mains plug not inserted
Motor overload protection
has switched the motor off
Faulty connecting cable
On/off switch faulty
Faulty capacitor
2. Machine runs roughly
Cause
Dirty brush, pad or working
tool
Working tool not centred
Working tool worn out
mains plug before
Remedy
Insert properly
Let the machine cool
down and start it again
Exchange
Exchange
Exchange
Remedy
Clean tools
Centre it again
Exchange
12. Technical Data
Type
Voltage V
Frequency Hz
Protection class
Protection grade IP
Drive motor W
Brush - ø mm
Pad - ø mm
Rotation speed rpm
Working g/cm²
pressure
Torque Nm
Cable length m
Noise level dB(A)
Weight kg
Vibration m/s²
CE testing
Type
Voltage V
Frequency Hz
Protection class
Protection grade IP
Drive motor W
Brush - ø Mm
Pad - ø Mm
Rotation speed Rpm
Working g/cm²
pressure
Torque Nm
Cable length M
Noise level dB(A)
Weight Kg
Vibration m/s²
CE testing
Type
Voltage V
Frequency Hz
Protection class
Protection grade IP
Drive motor W
Working width - Mm
ø
Pad - ø Mm
Rotation speed Rpm
Working g/cm²
pressure
Torque Nm
Cable length M
Noise level dB(A)
Weight Kg
Vibration m/s²
CE testing
10
ES 420 ES 420S ES 420-2
230 / 110 230 230
50-60 50 50
I I
44 44 44
1200 1600 1300/1600
420 420 420
406 406 406
170 140 140/280
50 54 60
56 102 90/55
12 12 12
63 63 63
40 43 43
2,5 2,5 2,5
X X
ES 500 ES 51S ES 51S-3
230 / 110 230 / 110 3 x 400
50-60 50-60 50-60
I I
44 44 44
1600 1500 1500
510 510 510
432 432 432
155 145 145
40 51 51/210
92 98 98
12 12 25
62 64 64
46 64 64
2,5 2,5 2,5
X X
STR 580/ STR STR 702/
STR 580 701 STR 702S
EVF
230/ 230 / 3 x 400
3 x 400 110
50 50-60 50-60
I I I
44 44 44
1000/1200 1500 1500/2000
406-790 430-510 430-1050
406 432 432
145/100 145 72/145
50 51 51
66/115 98 199-98/
265-132
12/20 12 25
63 63 63
36 64 65
2,5 2,5 2,5
X X X
I
X
I
X