Service - clearaudio electronic double matrix professional SONIC Bedienungsanleitung

User manual / Bedienungsanleitung
Auto protect:
If the cleaning and vacuum assembly is open (Fig. 2, No. 13, page 7), all functions of the buttons
are deactivated. The antistatic arm can still cause the rotation of the platter axis when turned to the
middle.
Please note:
If you won't be using the
you drain the remaining fluid from the cleaning fluid reservoir. For this pull both hoses from the vac-
cuum unit, and passthem in a bowl (etc.) and press the bottom „Liquid".
Important:
double matrix professional SONIC
After use, the
the switch on the IEC socket to the position "0".
If you won't be using the unit for more than a week, we recommend to unplug the
cleaning machine.

9. Service

The standard warranty period for the
By returning your completed warranty card to Clearaudio within two weeks of purchase, you can
benefit from an extended warranty period of three (3) years.
double matrix professional SONIC
The
ranty period, otherwise the warranty will expire.
Regular visual inspection of a possibly defective insulation of the cable is also advisable for your own
safety. A damaged mains lead should be replaced immediately by an expert.
Servicing for all Clearaudio products must be done via your dealer.
To transport the Clearaudio
and be sure to pack the unit exactly as it was delivered, by following the reverse of the procedure
described in setup of the
Disclaimer
Clearaudio assumes no liability for damage caused to records resulting from incorrect product
handling.
12
double matrix professional SONIC
double matrix professional SONIC
should only be repaired by the manufacturer during the war-
double matrix professional SONIC
double matrix professional SONIC
for more than a week, we suggest that
should always turned off by pressing
is two (2) years.
, always use the original packaging
.
© clearaudio electronic GmbH, 2017/11