Points To Note - clearaudio electronic double matrix professional SONIC Bedienungsanleitung

User manual / Bedienungsanleitung

8. Points to note

Waste fluid tank:
The waste fluid tank has a capacity of approx. 0.5 litres. We recommend regular draining of the
tank, to avoid any damage. Please note that with intensive use waste fluid can evaporate completely
leaving residue within the waste tank.
To empty the waste fluid tank:
1. On the back panel you will find the drain tube, which can be pulled out (see Pic. 2, No. 10,
page 7).
2. Remove the sealing plug from the drain tube.
3. To empty the waste fluid tank completely, tilt the
45° to the rear. Once emptied, be sure to reseal the drain tube again.
CAUTION:
Do not re-use waste cleaning fluid. This could damage your machine.
Cleaning the fluid reservoir:
The cleaning fluid reservoir has a capacity of approx. 0.4 litres. We recommend that you fill the
tank only with Clearaudio
ve the best cleaning results.
CAUTION:
Never use foaming or corrosive liquids, or water. This could cause serious damage to your
machine and may void your warranty.
Pic. 5: Warning
LED level indicator:
When the last LED (0%) of the level indicator is flashing (Pic. 2 No. 12, page 7), the functions "Auto",
"Superclean" and in manual mode, the function "Liquid", will be deactivated. This protects the liquid
pump from damage. To re-activate these functions, fill the cleaning fluid reservoir with more
Groove
cleaning fluid.
CAUTION:
double matrix professional SONIC
Ensure that the
servoir so that you can read the current level on the LED level indicator.
Made in Germany
Pure Groove
cleaning fluid (available at www.analogshop.de) to recei-
double matrix professional SONIC
is switched on when filling the cleaning fluid re-
about
Pure
11