File Manage" Screen - JVC KY-F550 Bedienungsanleitung

5. Setting Via the Menu Screen (continued)

"FILE MANAGE" Screen

The following can be performed on the "FILE MANAGE" screen.
● Saving menu settings in 3 types of files (A, B and C).
● Retrieving stored files (A, B and C).
● Resetting menu settings to factory settings.
1. 2.
- - - MENU - - -
EXPOSURE . .
WH I TE BA L ANCE . .
PROCESS . .
SYSTEM . .
. .
CAPTURE
F I L E M ANAGE . .
EX I T
"MENU" Screen
1. 2.
- - - F I LE MANAGE
LOAD F I LE
LOAD
STORE F I LE
STOR E
RESET F I LE
RESE T
PAGE BACK
"FILE MANAGE" Screen
3.
- - -
F I LE MANAGE
LOAD F I LE
LOAD
STORE F I LE
STOR E
RESET F I LE
RESE T
PAGE BACK
4.
- - - F I LE MANAGE
LOAD F I LE
LOAD
STORE F I LE
STOR E
RESET F I LE
RESE T
PAGE BACK
E-44
Blinking
- - -
A
CANCE L
A
CANCE L
A
CANCE L
Blinking
- - -
A
CANCE L
A
CANCE L
A
CANCE L
Blinking
- - -
A
CANCE L
A
EXECUTE
A
CANCE L
Display the "FILE MANAGE" screen
Make sure that the Switch 4 located at the side of this unit is
set to [OFF] (lower side).
1.
Press the [MENU] button for 1-2 seconds.
The "MENU" screen will be displayed.
2.
Use the [5/∞] buttons to select "FILE MANAGE..", then press
the [SET] button.
The "FILE MANAGE" screen will be displayed.
Save the set value
1.
Use the [5/∞] buttons to select "STORE FILE", then press
the [SET] button.
The set value displayed will start to blink.
2.
Use the [5/∞] buttons to select "A","B" and "C", then press
the [SET] button.
3.
Use the [5/∞] buttons to select "STORE", then press the [SET]
button.
"CANCEL" will start to blink.
4.
Use the [5/∞] buttons to select "EXECUTE", followed by press-
ing the [SET] button to save the menu settings in the selected
file destination.
5.
Press the [MENU] button for 1-2 seconds.
The normal screen will be displayed.