Bosch GST 85 P PROFESSIONAL Bedienungsanleitung Seite 12

2 609 931 878.book Seite 1 Donnerstag, 4. November 2004 8:06 08
Tool Specifications
Jigsaw
Article number
Jigsaw
Article number
Rated input power
Output power
Stroke rate at no load
Stroke
Stroke rate preselection
Orbital action
Sawdust Blower Device
Cutting capacity, max.
Wood
Aluminium
in non-alloy steel
Bevel cuts (left/right)
Weight according to EPTA-Procedure
01/2003
Protection class
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries, these
values can vary.
Machine Elements
The numbering of the machine elements refers to
the illustration of the machine on the graphics
page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
1 Rotatable top handle with pushbutton
2 Stroke rate preselection thumbwheel
(GST 85 PE/GST 85 PAE)
3 Allen key
4 On/Off switch
5 Vacuum connection (GST 85 PAE)
6 Switch for sawdust blowing device
7 Lever for adjustment of pendulum action
8 Base plate (GST 85 P/GST 85 PE)
8 Base plate with mit interior extraction
channel (GST 85 PAE)
9 Stroke rod
10 Guide roller
11 Saw blade*
12 Cover guard (GST 85 PAE)
13 Contact protector
12 • 2 609 931 878 • TMS • 27.10.04
GST 85 P
PROFESSIONAL
0 601 584 1..
[W] 580
[W] 350
[spm] 3 100
[mm] 26
–
[mm] 85
[mm] 20
[mm] 10
[°] 0 – 45
[kg] 2.4
/ II
14 Scale for mitre angle
15 Screw
16 Angle gauge**
17 Thread
18 Positioning pin/marking
19 Splinter guard
20 Screw for replaceable base-plate cover
(GST 85 PAE)
21 Replaceable base-plate cover
(GST 85 PAE)
22 Slider (GST 85 PAE)
23 Circle cutter/parallel guide*
* Not all of the accessories illustrated or described are
included as standard delivery.
**Commercially available (not included in the delivered
items)
Intended Use
The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ceramic
plates and rubber while resting firmly on the
workpiece. It is suitable for straight and curved
cuts with mitre angles to 45°. The saw blade rec-
ommendations are to be observed.
English - 1
GST 85 PE
PROFESSIONAL
0 601 584 6..
GST 85 PAE
PROFESSIONAL
0 601 584 8..
580
350
500 – 3 100
26
85
20
10
0 – 45
2.4
/ II