Led Indicators; Connectors And Buttons - Axis M1104 Installationsanleitung

AXIS M11 Series Installation Guide

LED Indicators

LED Color Indication
Network Green Steady for connection to a 100 Mbit/s network. Flashes
for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for
network activity.
Unlit No network connection.
Status Green Steady green for normal operation.
Note: Configure the Status LED to be unlit during normal
operation, or to flash only when the camera is accessed
from Setup > System Options > LED. See the online help
files for more information.
Amber Steady during startup, reset to factory default or when
restoring settings.
Red Slow flash for failed upgrade.
Power Green Normal operation.
Amber Flashes green/amber during firmware upgrade.

Connectors and Buttons

Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
The product shall be connected using a shielded network cable (STP). All cables connecting
the product to the network shall be intended for their specific use. Make sure that the
network devices are installed in accordance with the manufacturer's instructions. For
information about regulatory requirements, see Electromagnetic Compatibility (EMC), on
page 2.
Control Button
The control button is used for:
• Resetting the product to factory default settings. See Reset to Factory Default Settings.
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS Service.
For more information about these services, see the User Manual.
Page 9