Changing The Password (Pin-Code); Factory Defaults; Operation; Basic Operating Steps - AEG DVB-S2/HD 4546 Bedienungsanleitung

AEG_BDA_DVB-S2_4546_GB.qxd:CL_BDA_DVB_T776_GB_ka.qxd
Changing the password (PIN code)
After a PIN code is input, several menu options can
be called up. You may change the password (PIN
code) set in the factory and enter any other four-digit
number as your personal PIN code. The password
"000000" has been pre-programmed in the factory.
Note your new password; once changed, only
the new code is valid for all password queries.
If you've forgotten your personal password, you
can assign a new password by means of the
master password "888888".
Enter the old password (PIN) using the numercal
keys.
Enter the new password using the numercal keys.
Enter the new password again.
The information window "Password Set Success"
appears.
Press the 'EXIT' key to confirm.
The new password is integrated.

Factory defaults

The receiver is reset to its condition on delivery.
All of your settings and stored data are deleted.
Select the "Restore Factory Default" submenu in
the "System" menu by using the "M CH-" and
"L CH+" arrow buttons.
Press the 'OK' key to confirm.
You will be asked to enter a password.
Press the "OK" button if you would like to return
the receiver back to the factory settings.
Press the "EXIT" button if you would like to exit
the menu.
Wait until the receiver re-starts.
This process may take a few minutes.
The installation menu then appears.
Press the "EXIT" key to return to the TV channel.

Operation

Basic operating steps

Switching between radio and TV mode
To switch between radio mode and TV mode,
press the "TV/RADIO" key.
Selecting channel
To change to the previous or next channel press
the "M CH-" and "L CH+" arrow keys or the
"L M" keys at the receiver.
You may also switch directly to a station by
entering the memory space number of the station
using the numerical keys.
46
22.01.2010
Volume
To increase or reduce the volume, press the
volume keys " VOL+" and "
To switch the sound off at the receiver, press the
"MUTE" key.

Program Manager

Press the MENU button.
In the "Program" main menu, call up the "Program
Edit" submenu.
You can make radio program settings only
when the device is in radio mode.
You will be asked to enter the password.
Please note the messages at the bottom edge of the
picture concerning further operation. The coloured
buttons on the remote control correspond to those
on the screen.
To leave the menu, press the "EXIT" key repeatedly.

Delete

You can completely delete channels from the
Program Table.
Use the "M CH-" and "L CH+" arrow keys to
select the channel you wish to delete.
Press the blue button. A security prompt appears.
If you want to delete a channel, press the "OK"
button on the remote control.
Repeat these steps for any other channel you
may wish to delete.

Add Favourites

For an easier and quicker access to your favourite
channels, you can add these channels to your
Favourites List.
Use the "M CH-" and "L CH+" arrow keys to
select the desired channel.
Press the FAVOURITE button. A list of the various
favourites lists appears.
Use the "M CH-" and "L CH+" arrow keys to
select the desired list. Press the "OK" button to
assign the station to the list.
Repeat these steps for the next station which you
would like to include in the list of favourites.
If you want to remove a station from the favourites
list again, select it using the "M CH-" and
"L CH+" arrow keys. Press the FAVOURITE
button again and select "Disable". Then press the
"OK" button.
11:34 Uhr Seite 46
VOL-".