Technical Data; Troubleshooting - AEG DVB-S2/HD 4546 Bedienungsanleitung

AEG_BDA_DVB-S2_4546_GB.qxd:CL_BDA_DVB_T776_GB_ka.qxd

Technical data

Receiver
Dimensions (W x D x H)
Weight (without packaging) 0.82 kg
Operating temperature
Storage temperature
System
Corresponds to DVB standard
Tuner input
Jack
Frequency range
Level range
Demodulation
Teletext
Corresponds to DVB
standard
MPEG audio (MPEG 1 layer 1 and 2)
Typ

Troubleshooting

Symptom
The view in the display
does not light up.
No sound and no picture,
control lamp on the
receiver is on.
No sound or picture.
The TV set does
not show a picture.
Poor picture,
locking error
The remote control
does not function.
If a malfunction still cannot be rectified, please
contact your specialist dealer or the manufacturer.
Remote control
Range
Mains adapter
220 x 170 x 41 mm
Current consumption
Mains voltage
0 °C to +40 °C
–40 °C to +65 °C
Connections
Digital audio output
Video output
Audio output
F socket (75 Ω) Tuner input
Tuner loop-out
950 ~ 2150 MHz
SCART
-65 ~ 25 dBm
USB
QPSK/8PSK
HDMI
STB (normal TV) / VBI
This device has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest
Mono, stereo
safety regulations.
Subject to technical changes without prior notice!
Possible cause and remedy
The power cable is not connected.
Connect the power cable to the mains socket.
The receiver is in standby mode.
I
Press the " " key. The receiver switches on and the
channel is shown on the TV screen.
The receiver is in VCR mode.
Press the DTV/VCR button.
Wrong picture format setting.
Press the green button repeatedly to choose the correct setting.
No signal or a weak signal only.
Check the cable connection to the receiver and from the receiver to the
connected devices.
Align the antenna.
The system is not connected correctly.
Check the SCART or HF cable's connection.
The TV set is not in AV mode.
Switch the TV set to the relevant AV input.
The antenna is not aligned correctly.
Align the antenna.
The batteries are spent.
Replace the batteries with new ones.
The remote control is not being pointed properly.
Point the remote control at the front of the receiver and make sure that nothing
is positioned between the remote control and the receiver.
22.01.2010 11:34 Uhr
Up to 5 m
Max. 18 W
100 – 240 V AC
50–60 Hz
1 x RCA cinch coaxial
1 x RCA Cinch CVBS
2 x RCA R/L
F socket
F socket
RGB, CVBS, Audio
2.0
576p, 576i, 720p,
1080i resolution
Seite 51
51