Werbung
GB
Using the stroller with baby seat:
Attention: this generally requires an adapter that can be obtained as accessory part
from your specialist dealer (not included with the delivery scope). The below
instructions provide information on how to use baby seat Maxi Cosi with the
respective adapter. For more information on how to use the adapter with other
models or baby seats produced by other manufacturers, please contact your
specialist dealer.
Fitting baby seat Maxi Cosi to the stroller:
In order to fit the baby seat, please remove the seat from the chassis first. Now affix
both adapters in the notches respectively provided for this purpose on the chassis
(fig. 43).
Now place yourself at the side of the push bar and affix the adapter marked with "L"
(fig. 44) on the left side (fig. 43) and the adapter marked with "R" on the right side
of the chassis.
Then put the baby seat into the adapters so that the child will be facing rearward.
The baby seat is fixed securely when you hear it clicking into place. To verify the
baby seat has really been affixed securely to the stroller, lightly pull on the baby
seat's carrying handle.
Always ensure the baby seat has been mounted in correct position (fig. 35) -
otherwise it will not be securely affixed.
To remove the baby seat from the stroller, press both buttons provided on the baby
seat simultaneously and pull it off the frame (fig. 36). Then press both adapter
buttons (fig. 37) and remove the adapters from the baby seat.
Werbung
