Werbung
GB
If necessary, the stroller can now be put up (fig. 32).
PLEASE NOTE: Do not exert any force in direction of the tube when you let the
locking levers go. Otherwise the locking cannot be released.
Using your stroller with prambody:
Setting up the prambody:
Prior to starting the assembly, please ensure all parts are present:
prambody 1 x (fig. 33), prambody adaptor 2 x (fig. 34).
To set up the prambody, please remove the fabric mattress first. Now slide both
retainers outwardly until they snap in the notches and the prambody is put up (fig.
36). The mattress can now be put back onto the prambody.
To fold up the prambody, please remove the fabric mattress (lying surface) first and
then slide both retainers inwardly (fig. 36). The mattress can then be put back onto
the prambody (fig. 35).
Fitting / removing the prambody:
In order to fit the prambody, please remove the seat from the chassis first. Now put
the prambody onto both notches provided on the chassis and let it click into place. In
order to stabilize the prambody, open the bracket (fig. 37) provided at the cot's
bottom side and affix it to the mechanism provided for this purpose at the shopping
basket's front side (fig. 38).
ATTENTION: the prambody can only be mounted with the child facing rearward as
it would otherwise not be possible to secure it properly (fig. 39).
In order to remove the prambody, fold the stabilizing bracket back. Then push both
buttons provided at the sides down and take the cot off the frame (fig. 40).
Adjusting the roof at the prambody:
Press both buttons provided at the sides and use the handle to push the roof down in
order to fold it up. To unfold the roof, pull the roof's handle upward until you hear it
click into place (fig. 41).
Werbung
