Presettings Of The Hytronic Service Handy; Querying And Changing Settings - Geberit HyTronic Service-Handy Betriebsanleitung

HyTronic Service Handy, Bidirectional
Operation
Operation
Insert batteries before using the HyTronic Service
Handy for the first time.
The functions of the navigation buttons are
described under "Controls".
Presettings of the HyTronic
Service Handy
• [Buzzer] [Summer]
Buzzing signal volume
• [Contrast] [Kontrast]
Set display contrast
• [Version] [Version]
Display software version of Service Handy
• [Language] [Sprache]
Change menu language English [EN] / German [DE]
1 Switch on HyTronic Service Handy; the following
information is displayed:
GEBERIT
00 Bidirect
08 Unidirect
Settings
2 Go to [Settings] [Einstellung] and press "OK".
GEBERIT
Settings
00 Bidirect
08 Unidirect
3 The following information is displayed. Now select
the settings to be changed.
.0 Back
.1 Buzzer
.2 Contrast
.3 Version
There are different types of menus that require
different operation. See "Operation of menu types
A, B, C, D".
4
Desired settings are made. Go to [Back][Zurück]
and press "OK".
The following information is displayed:
GEBERIT
00 Bidirect
08 Unidirect
Settings
5 Switch off HyTronic Service Handy.
16
GEBERIT
00 Bidirekt
08 Unidirekt
Einstellung
GEBERIT
Einstellung
00 Bidirekt
08 Unidriekt
.0 Zurück
.1 Summer
.2 Kontrast
.3 Version
GEBERIT
00 Bidirekt
08 Unidirekt
Einstellung

Querying and changing settings

Prerequisites
• Control is installed correctly and operating
• Operating instructions of the control are present
A menu item can be exited at any time by pressing
"Esc".
If contact is not ended after the operation is
finished, control remains inactive for ten minutes
until it ends contact automatically.
1
Switch on HyTronic Service Handy; the following
information is displayed
GEBERIT
00 Bidirect
08 Unidirect
Settings
2
Aim HyTronic Service Handy at sensor of control
and select the menu item [Bidirect] [Bidirekt] with
the button "OK". HyTronic Service Handy
establishes contact with control.
Point to
Device!!
When contact is established, the menu of the
control is displayed
Urinal
00 Ctrl ON
01 Ctrl OFF
02 Commands
3
Look for desired menu item in the operating
instructions of the control. The possibilities for
each menu item are described therein
4
Menu items are listed by numbers. Go to desired
menu item in the display by means of the
navigation buttons and press "OK" (in the
example [MainProgr] [Hauptmenü])
24 CleanMode
30 MainProgr
31 Esaver
32 CleanEn
GEBERIT
00 Bidirekt
08 Unidirekt
Einstellung
Auf Sensor
richten!!
Urinal
00 EIN
01 AUS
02 Befehle
24 Reinigung
30 Hauptmenü
31 E Sparen
32 FreiReini