Intended Use; Function; Contact - Geberit HyTronic Service-Handy Betriebsanleitung

HyTronic Service Handy, Bidirectional

Intended use

Symbols
Guarantee
Intended use

Function

Contact

14
Term Explanation
Menu type Menu types distinguish the type of operation of a menu item.
Unidirectional Infrared signals are sent from the Handy to the control; the
control does not "reply" to the Handy.
Bidirectional Infrared signals are sent from the Handy to the control; the
control "replies" to the Handy.
Symbol Meaning
Refers to important information.
Do not throw into the waste bin, but dispose of properly!
The national statutory guarantee applies. For information about guarantee services
above and beyond this scope, please contact your responsible Geberit sales
company directly or visit www.geberit.com.
These operating instructions describe the operation of bidirectional controls.
The Geberit HyTronic Service Handy is used for setting and querying setting values
of different electronic Geberit products such as washbasin taps, WC controls and
urinal controls. The different possibilities are described in detail in the operating
instructions of the respective product. In case of misuse, no guarantee or liability
claims in the event of personal injury or material damage are accepted.
The HyTronic Service Handy communicates with the control via an infrared
interface. To make any settings, the Service Handy has to be aimed at the sensor
from a distance of 10 - 30 cm. Do not turn it away during operation. Otherwise, a
different control might be addressed.
Do not hold the device in the area of the water jet during operation.
10 - 30
If you have any questions or problems, please contact the Geberit sales company
in your country or see www.geberit.com.