Remote Control Handset; Cleaning And Maintenance - Hantech 1030586611 Bedienungsanleitung

5. To set your fan to automatically shut off, press the timer button
control panel or the remote control. When set, the fan will run and automatically shut
off after the set dura on of time (1-8 hours) has expired.
6. To activate the breeze mode , press the sleep/breeze mode button
on the control panel or remote control. When turned on, the fan will random-ly cycle
through the speed settings, recreating a natural outdoor breeze. To activate sleep
mode , press the mode button again. This function slows the fan speed down,
and when used in conjunction with the timer settings, will ultimately turn the fan off.
7. To turn the fan off press the power button
control.
NOTE: Your fan features a LCD display panel. When a specific feature is activated on
your fan, the LCD panel will illuminate with the corresponding icons showing which
features have been activated.
Figure 3
A
E
B
A. LCD Display Panel
D
B. Power button
C
F
C. Speed Button
D. Timer Button
E. Sleep/Breeze Mode Button
F. Oscillation Button
G
G. Speed Setting Indicator
Lights

REMOTE CONTROL HANDSET:

NOTE: Please remove the protective sticker from the remote control battery before
operation. This unit includes one lithium battery, CR2025/3V. Remove battery before
discarding the remote.
a) Locate the battery compartment on the bottom back of the remote control handset.
Slide the battery cover out with your thumb.
b) Remove old battery.
c) Place new battery into battery compartment.
d) Slide battery compartment into the remote control handset.
NOTES:
• Remove the battery from the equipment when it is not being used for an extended
period of me.
• Remove the used battery promptly.

CLEANING AND MAINTENANCE

Follow these instructions to correctly and safely care for your fan. Please remember:
• Always unplug the fan before cleaning or assembly.
• Do not allow water to drip on or into the fan motor housing.
35
located on the
located
located on the control panel or remote
B
F
C
E
D
• Be sure to use a so cloth, moistened with a mild soap solution.
• Do not use any of the following as a cleaner: petrol, thinners or benzene.
FAN STORAGE
Your fan can be stored either par ally disassembled or assembled. It is important to keep
it in a safe, dry location.
• If stored disassembled, we recommend using the original (or appropriately sized) box.
• If stored assembled or par ally assembled, remember to protect the fan head from
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
36