Led - Display; On/Off -Switch; Zoning - IC Audio MT-AMP 240 Bedienungsanleitung

Device Functions
- Front side .

LED - Display

The LED-Display shows the operational readiness The LED-Display shows the operational readiness
of the Mixer-Amplifier. of the Mixer-Amplifier.
ON/OFF - Switch
With this switch you turn on the apparat.
Position I = apparat is on
Position 0 = apparat is off
After turning the machine on, the LED is shining
blue. Before turning the machine on, the Master
controller should be set to a low volume.

Zoning

In addition to the normal 100V line output there are
two sets of 100V line terminals for 4 Zones which
can be selected using the push buttons on the
front panel.
ON/OFF - Switch
ic audio ic audio
LED - Display
MT-AMP 240 MIXER AMPLIFIER
Zone Button No.2
MT-AMP 240 MIXER AMPLIFIER
9
EN