Vu-Display; Microphone Input - IC Audio MT-AMP 240 Bedienungsanleitung

Device Functions
- Frontside -
VU - Display
The VU-Display shows the saturation degree of the
Mixer Amplifier. The green LED's indicates the
level which can be run continously without any
interferences. The red LED is iluminated at the full
saturation degree only. This level is not appropriate
for enduring operation.

Microphone Input

The first microphone MIC1 is prior to all others. The first microphone MIC1 is prior to all others.
MIC1 being in use automatically gates all other MIC1 being in use automatically gates all other
microphones. If music is hooked up to the system microphones. If music is hooked up to the system
while an announcement is being made, the gate while an announcement is being made, the gate
shuts of the music so that with the specific desktop shuts of the music so that with the specific desktop
microphone the announcement signal can go microphone the announcement signal can go
through. This setting will remain until the through. This setting will remain until the
announcement has ended. announcement has ended.
Then then the music automatically fades back in. Then then the music automatically fades back in.
EN
10
VU meter - Display -20db, -6db, 0db.
Microphone Input (6,3mm chinch)
ic audio ic audio
MT-AMP 240 MIXER AMPLIFIER
MT-AMP 240 MIXER AMPLIFIER