Cd-Player And Tuner - IC Audio MT-AMP 240 Bedienungsanleitung

Device Functions
- Frontside -
CD-Player and Tuner are optional items
CD Operation
1. Select CD mode with LINE select switch.
2. Press Power key on CD-Player
3. Load disc into player and Play starts
automatically
4. Press Pause key and the play will be
suspended.
Press Pause key to resume play.
5. Press the Next keys (6+7) to select tracks
6. Press the Random key, random appears in the
display and tracks will be played out of the
sequence.
7. Press the Repeat key one time and the current
track is repeated. When the key is pressed
twice the whole disc will be repeated. To cancel
these functions press the Repeat key again.
8. Programming the CD-Player in STOP mode:
(a) Press the Program key
(b) Use the Next- or Previous key to
select a track
(c) Press the Repeat key to memorise the
selected track in your program. Repeat
stages (b) and (c) to program a maximum
of 20 tracks.
(d) Press the Play key to start the program. The
program repeats itself until the CD-Player
is stopped.
Tuner Operation
For FM reception connect a dipole aerial using
75 W coaxial to the socket at the rear of the unit.
Connect the supplied antenna to the AM spring
loaded terminals.
1. Select TUNER mode with the LINE select switch.
2. Select AM or FM with the BAND key.
3. Use the UP/DOWN keys to set a frequency
manually or the Scan key to automatically
search for the desired station.
4. To program a station press the Memory key.
5. Press a memory key (M1 to M5) or Shift key and
Memory key (M6 to M10) to store a frequency.
6 7 8 9
1 2 3 4 5
1. CD display
2. Repeat key
3. Random key
4. Program key
5. CD Power ON/OFF key
6. Previous key
7. Next key
8. Play/Pause key
9. Stop/Eject key
7 8 9 10 11
1 2 3 4 5 6
1. M1 (Memory key)
2. M2 (Memory key)
3. M3 (Memory key)
4. M4 (Memory key)
5. M5 (Memory key)
6. Shift key
7. Band select key
8. Down key
9. Up key
10. Scan key
11. ME key
ic audio ic audio
EN
13