Line In - IC Audio MT-AMP 240 Bedienungsanleitung

Device Functions
- Rearside -
LINE IN (CD/AUX)
The equipment provides an auxiliary input which
may be used for connecting other signal sources
such as a CD or Cassette player. A slide switch is
located on the front panel for selection of, Aux and
CD. The line level control operates on each of the
input sources. To operate select the desired music
source using the slide switch and turn the "Line"
control clockwise to increase the volume or
anticlockwise to reduce the volume.
The AUX/CD input sockets are standard RCA
phono, two sockets are supplied and these are
linked together internally, this allows stereo signal
source to be used without the need to obtain a
special lead, however you may wish to check with
the manufacturer of the signal source to ensure
that no damage will result if the left and right
output channels are put in parallel.
EN
19
Tape
Line 100,70,25V,8ohm
ZONE 1 (100V)
ZONE 2 (100V)
ZONE 3 (100V)
ZONE 4 (100V)
ic audio