IC Audio MT-AMP 240 Bedienungsanleitung Seite 20

Device Functions
- Rearside -
Microphone input with XLR-Jack
Mic 1 input is either a balanced standard 1/4"
stereo jack on front panel or XLR on the rear panel
(with selectable phantom power). Mic1 input has
VOX priority which will be override Mic2-4 and
AUX (LINE) input signals but not the Telephone
input. Mic2-4 inputs are XLR with selectable
phantom power located on the rear panel.
The phantom power is factory set off and can be
enabled as follows:
1. Remove power lead from the AC wall socket.
2. Remove top cover.
3. Locate the link pins (marked jump 1,2,3&4) on
the PCB behind each microphone XLR input
socket.
4. Connect shorting plug to the centre pin and ON
position to enable the Phantom power.
Microphone input (MIC 1-4 with XLR-jack)
EN
20
XLR-Input
1: SCREEN
2: HOT
3: COLD
ic audio
2 1
3