Device Functions
- Rearside -
115V and 230V Mains Connection
The amplifier is factory set at 230 V(AC) mains
voltage. The Mains Selector is at the Rearside of
the Mixing Amplifier.
You can set the switch to 115V if neccessary by
pushing the slide switch from right to left.
A before please disconnect the mains cable.
Ensure yourself that the device is set to the local
mains voltage before you connect it.
24V-Battery Supply
You can also drive the device with 24V(AC).
This is useful in case your mains connection is
broken down and you can bypass this with an
uninteruptible power supply (UPS).
In this case no manual switching is interruped at
the amplifier. As soon the mains connection, the
device is automatically driven by external battery
power, regardless to the position of the ON/OFF-
switch.
Electrical stability of the system is increased by
earthing the case.
Mains Supply
24V-Battery Supply / UPS Connection
ic audio
Mains Selector
EN
15