IC Audio MT-AMP 240 Bedienungsanleitung Seite 16

Device Functions
- Rearside -
100V Speaker Output
The amplifier provides four different 100V
Loudspeaker Zones . Additionally you can connect
the Loudspeakers with one 25V and one 70V
Zone.
! The 100V - Output reproduces all signals
processed by the Mixing Amplifer operated in
the standard mode.
EN
16
8ohm Speaker Output
This output allows connection of standard low
impedance loudspeakers. The minimum load
impedance must be 8ohm. When two or more
loudspeakers are connected, ensure that they are
wired in such a way, that the load impedance is
between 8ohm and 16ohm.
Line 100,70,25V,8ohm
ZONE 1 (100V)
ZONE 2 (100V)
ZONE 3 (100V)
ZONE 4 (100V)
ic audio