RICOO D0122 Montageanleitung Seite 15

NOTE: Read the entire instruction manual before you start installation and assembly.
• Please note: Images in these assembly instructions are only technical presentation of the product. Actual product design may vary
minimally.
• Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If
you have any questions regarding any of the instructions or warnings, please contact your local distributor.
• This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause
damage or serious injury.
• This product may only be assembled / installed by the technical staff.
• Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and
components.
• When mounting on the wooden beams wall, make sure that the fastening screws are anchored in the center of the beams. It is highly
recommended to use a beamfinder.
• Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage the items, this greatly reduces their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
By reason of large television construction types on the market, we can't adjust our screen installation materials for each screen
type. Therefore it is possible that the screws which are numerously delivered don't fit with your TV/Monitor. We ask for your
understanding that we can't cover up all possibilities of many screen types.
Each wall is built up of different materials which can result a special requirement. Therefore we are concentrated on the delivery
of installation materials only for mass concrete walls. Use our included installation accessories only for mass concrete walls.
• If your walls have a special demand of materials, we advise you to ask in an expert shop for a suitable acquirement of the installation
materials.
• Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be
damaged. In case of doubt request for help from an expert.
• Make also sure that you and optionally the co-helper or representatives have registered the mounting instructions before the installation
and also the warning notice.
Dear customer,
we are pleased that you have decided for a product of the brand "RICOO"
Sometimes, despite our efforts to provide you with a high-quality product, it may happen
that an accessory is missing or a part is damaged during transport
return the item in such a case, simply request replacement for the missing or damaged
part at our customer hotline .
Contact details from our customer hotline are listed below.
When contacting us, please mention the article data (listed on the right side),
article color as well as the required spare part numbers (including the required
quantity of items), as indicated in the "Scope of delivery" section of this manual.
Please keep ready your order number / order ID for our customer hotline. We will process
your request immediately
WARNING
!
.
. Please do not
1
Product data
D0122
Customer-Hotline
E.N.Z. Engineering GmbH
Gewerbestr. 11
79364 Malterdingen
(Germany)
Tel: +49 (0) 7644-565310
Fax: +49 (0) 7644-5653199
E-Mail: support@ricoo.de
www.ricoo.eu
Deutsch English