Abus Secvest FUBE50001 Installations- Und Bedienungsanleitung Seite 45

Displays and functions
Disarming the wireless alarm system
Status query
Arm internally/Switch output
20 EN
 Perform authentication in line with the configured control
panel operating mode.
 Disarm the wireless alarm system by pressing the "disarm"
button.
 Perform authentication in line with the configured control
panel operating mode.
 Run a status query for the wireless alarm system by pressing
the "status query" button.
 The LED display indicates the status of the different
partitions.
 This button can be used either for arming internally or for
switching one (or more) wireless alarm system output(s). This
can be configured within the wireless alarm system.