Sony PCWA-C300S Benutzerhandbuch Seite 20

3
4
20
Hints
• If the computer is not connected to a wireless network, an "x" is shown for the
"Wireless Network Connection *" icon in the "Network Connections" window.
• If you have installed Windows XP Service Pack 1, see page 21.
From the "Available Wireless Networks" list in the "Connect
to Wireless Network" dialog box, select the Access Point to
which you want to connect.
Hint
The "Available Wireless Networks" list shows the names of Access Points within
communication range of the computer. When using the Wireless LAN Access Point
PCWA-A320, the default Network Name (SSID) of the Access Point is shown on
the ID label of the card. For details on the position of the label and other
information, refer to the manuals of the Access Point. Because the Network Name of
an Access Point may have been changed, consult your network administrator if you
are not sure.
If Data Encryption (WEP) is enabled for the Access Point,
enter the encryption key (WEP key) in the "Network key"
field.
The key entered here must be exactly the same as that set for the
Access Point. Permissible characters and their maximum number are
detailed below.
Permissible characters
Maximum number
of characters
Hints
• ASCII and hexadecimal characters are automatically identified.
• The data encryption (WEP) function serves to prevent unauthorized access to the
network. When the function is enabled, only computers configured with the
correct encryption key (WEP key) can join the network. For security reasons, it is
strongly recommended that you enable this feature. The setting can be made
individually for Access Point Network connection mode and Peer to Peer Network
connection mode. When connecting to an existing network, consult your network
administrator regarding the proper settings. For information on how to control this
setting at the Access Point, refer to the manuals of the Access Point.
ASCII
Alphanumeric characters
5 or 13 characters
Hexadecimal
0 to 9, A to F, a to f
10 or 26 characters