Windows Xp Operating System - Sony PCWA-C300S Benutzerhandbuch

Windows XP operating system

After installing the necessary software, you must make the necessary
settings to establish a connection with the Access Point.
If you want to establish a connection in Peer to Peer Network connection
mode, refer to the Wireless Panel Help for details about the necessary
settings.
Note
Before configuring the Wireless LAN PC Card
Perform the following steps to confirm that the "Use Windows to configure my wireless
network settings" check box is selected. This option is selected by default.
1 Click "Start", "Control Panel", and double-click "Network
2 Right-click "Wireless Network Connection *" ("*" is a
3 Click the "Wireless Network" tab.
4 Confirm that the "Use Windows to configure my wireless
1
Click "Start", point to "Connect To", and click "Show all
connections".
The "Network Connections" window appears.
2
Right-click "Wireless Network Connection *" ("*" is a number
that differs according to the computer settings), and click
"View Available Wireless Networks" on the shortcut menu.
The "Connect to Wireless Network" dialog box appears.
Connections".
Hint
If "Network Connections" is not displayed, click "Switch to Classic View".
number that differs according to the computer settings),
and click "Properties" on the shortcut menu.
network settings" check box is selected. If not, select it.
19