Technical Data - Clatronic EK 3088 Bedienungsanleitung

5. Pierce the eggs on the bottom to avoid that they crack. Please use the pricker on the
underside of the measuring beaker. Press the egg delicately against the piercing needle
until the egg is pierced.
6. Distribute the eggs evenly and one opposite the other in the egg tray.
7. Cover it with the lid.
8. Insert the plug in a duly installed 230 V/50 Hz socket.
9. Turn the device on using the on/off switch. The control lamp now illuminates.
10. The eggs are ready when the buzzer sounds. Switch the device off and remove the
mains plug from the socket.
11. Please hold the lid by the handle and put it to one side. Caution! Hot!
12. Take the egg tray out of the cooking bowl and run the eggs briefl y under cold water so
that they do not continue cooking.
13. Leave the device to cool before putting it away!
Mains Cable Take-up Device
The mains cable can be wound up on the base.
• Always remove the plug from the mains supply before cleaning the machine!
• The exterior of the machine should be cleaned, if necessary, with a slightly damp cloth
without additives.
• Wash the lid and the egg tray in a normal sink.
GB
• The decalcifi cation intervals depend on the hardness of the water and the frequency of
use.
• If the machine switches off before the water boils, it probably needs to be decalcifi ed.
• Do not use vinegar, but a normal citric acid-based decalcifi er. Follow the manufacturers'
instructions!
Model:........................................................................................................................... EK 3088
Power supply:........................................................................................................ 230 V, 50 Hz
Power consumption:.........................................................................................................350 W
Protection class:........................................................................................................................ Ι
38
05-EK 3088 Neu 38
Cleaning
Decalcifi cation

Technical Data

16.03.2007, 9:21:54 Uhr