Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WALL MOUNTING
In order to prevent injuries,the sound base device
must be securely fasten to the wall in accordance
with the below installation instructions.
Caution:
The ground must be firm and capable of han-
7
dling the load.
Use mountings that are appropriate for the
7
weight of the device.
For wooden or hollow wall structures use suit-
7
able plugs and screws. Seek advice from a
specialist dealer.
Warning:
In order to prevent injuries, the device must
7
be securely fastened to the wall in accord-
ance with the installation instructions.
Note:
Installation of the Soundbar GSB 900 for
7
professional use (e.g. in a bistro) must only
be carried out by an electrically qualified
person, in accordance with the applicable
construction regulations as per VDE 0100.
1
Drill the two holes(about 6mm diameter ) in the
wall and keep the distance between drill holes
of the sound base is 500mm.
50 0mm
2
Insert the two plugs supplied into two
drilled holes and then insert two screws
supplied
into
two
1 7
ENGLISH
-----------------------------------------------------------------------------------------------------
holes
and
tighten.
3
Take care to leave 4 mm between the screw
heads and wall.
4mm
4
Insert
the
wall-mounting
plied into the pedestal of the sound base.
5
Use the bracket screws supplied to insert the
wall-mounting bracket hole and tighten.
bracket
sup-
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
