Werbung
Verfügbare Sprachen
Verfügbare Sprachen
M U N I C H H O M E S Y S T E M S
Description of LIFT lifting control for HEATSCOPE® VISION and SPOT infrared heaters
To ensure the smooth functionality of HEATSCOPE® heating solutions even in flush mounting installations, we invented a fully automatic lifting unit,
so called MHS-LFT. The lifting system was exclusively built and manufactured for use with HEATSCOPE® infrared heaters ONLY. The LIFT will NOT work
with other heating systems and brands!
LIFT is built of a mechanical hinge and a linear drive. Additional the LIFT can be equipped with a mounting tray and a frame, which is surrounding the
ceiling recess with a nice optical edge.
As soon as min. one of the heating elements is switched on, the HEATSCOPE® will be lowered down automatically.
Due to this no heat accumulation will occur in the ceiling recess, which may be damage the heater on the long run.
Delivery contents of the LIFT lifting control unit (MHS-VS-LFT-C1 // MHS-VS-LIFT-C1 lifting control unit box for ceiling recess)
· 1 plastic box with cable screwings for installation in a dropped ceiling or ceiling recess
with integrated control units
· installation panel
· installation accessories (Screws, plugs etc. for ceiling installation NOT included)
optional:
· 1 mounting tray for installation in the ceiling recess
(this tray can be installed together with a LIFT control unit alone or a LIFT control unit with an additional frame)
· spacers for different installation constellations
· installation accessories
optional:
· 1 frame as optical edge of the ceiling recess
(this tray can be installed together with a LIFT control unit alone or a LIFT control unit with an additional mounting tray)
· installation accessories
Min. dimensions of ceiling recess acc. to model types
(WITHOUT mounting tray, WITHOUT frame)
LENGTH
MHS-SM2200
> 847 mm
MHS-SP2200
MHS-SM2800
> 921 mm
MHS-SP2800
MHS-VE1600
> 847 mm
MHS-VT1600
MHS-VE2200
> 1197 mm
MHS-VT2200
MHS-VE3200
> 1697 mm
MHS-VT3200
Min. dimensions of ceiling recess acc. to model types
(WITHOUT mounting tray, WITH frame)
LENGTH
MHS-SM2200
> 847 mm
MHS-SP2200
MHS-SM2800
> 921 mm
MHS-SP2800
MHS-VE1600
> 847 mm
MHS-VT1600
MHS-VE2200
> 1197 mm
MHS-VT2200
MHS-VE3200
> 1697 mm
MHS-VT3200
EN
Min. dimensions of ceiling recess acc. to model types (WITHOUT mounting tray, WITHOUT frame)
DEPTH
WIDTH
> 187 mm
> 212 mm
> 197 mm
> 212 mm
DEPTH
WIDTH
> 175 mm*
> 212 mm
> 185 mm*
> 212 mm
MHS Munich Home Systems GmbH · Kramergasse 32 · 82054 Sauerlach · Germany
Min. dimensions of ceiling recess acc. to model types
(WITH mounting tray, WITH or WITHOUT frame)
LENGTH
MHS-SM2200
> 863 mm
MHS-SP2200
MHS-SM2800
> 937 mm
MHS-SP2800
MHS-VE1600
> 863 mm
MHS-VT1600
MHS-VE2200
> 1213 mm
MHS-VT2200
MHS-VE3200
> 1713 mm
MHS-VT3200
A
* With this depth the heater is flush-mounted with the FRAME.
DEPTH
WIDTH
> 215 mm
> 220 mm
> 215 mm
> 220 mm
C
Die Montagehalterung sind
USE THIS
ONLY FOR
Werbung
