U.S. Robotics USRxx3453 Serie Schnellinstallationsanleitung Seite 9

Register your modem.
Click Windows Start and then click Run. In the "Run" dialogue box,
•
type D:\setup.exe. If your CD-ROM drive uses a different letter, type
that letter in place of "D". At the Installation CD-ROM interface, click
the Support link.
• Follow the on-screen instructions to register your modem.
Configuring V.Everything
NOTE: The modem needs to be installed and communicating with the
computer before the country setting can be changed.
Start a terminal program (e.g., Hyperterminal). Follow these three steps:
1. Type the AT command AT~C? and then press ENTER. A screen displaying
the list of countries supported by the modem appears as shown in the fol-
lowing list.
2. Select the country in which you plan to operate the modem and enter the
AT command ATC10=XX. For example, to set the country of operation to
Italy, issue the AT command ATC10=03 and then press ENTER.
00:US/Canada
01:UK
02:Germany
03:Italy
04:France
05:Russia
06:Japan
07:Australia
08:CTR21
09:Brazil
Special Notes
• CTR21 country setting covers: Austria, Belgium, Cyprus, Denmark, Fin-
land, Greece, Iceland, Ireland, Israel, Liechtenstein, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, Malta.
• If the desired country is not included in this list, try country setting
CTR21 or US/Canada.
• For LATIN AMERICAN countries: Brazil and Mexico have unique set-
tings. For other Latin American countries, select US/Canada as the
country setting.
10:China
12:Hong Kong
11:Czech Rep
13:Hungary
14:Indonesia
15:Korea
16:Malaysia
17:Mexico
18:New Zealand
19:Poland
20:Romania
21:Singapore
22:South Africa
24:Argentina
26:Bulgaria
23:Taiwan
25:India
27:CTR21
7