U.S. Robotics USRxx3453 Serie Schnellinstallationsanleitung Seite 11

4. For standard usage, make sure the DIP switches on the bottom of your
modem are set correctly. DIP switches 3, 5, 8, and 9 should be in the on
(down) position. For more information, refer to the "Configuring with DIP
Switches" section of the User Guide on the Installation CD-ROM for the
proper settings.
5. Is your phone cord properly connected? The phone cord should be plugged
into the
phone cord included in your modem's box, if possible.
If you have any difficulty with your modem, first make sure that
it was installed correctly.
Windows XP
• Click Windows Start and then click Control Panel.
• Click Phone and Modem Options and then click the Modems tab.
You should see a description of your new U.S. Robotics modem and a
COM port setting. If you do not see a description of your modem,
see the Note at the end of this section.
• Click Modem, highlight the description of your new modem, and
click Properties.
Click the Diagnostics tab.
•
• Click Query Modem. You should see a series of commands and
responses from the modem. This means that the installation was a
success. If you do not see commands and responses, shut down and
restart your computer. To determine if your modem is functioning
properly, repeat the steps above. If your modem is still not working,
refer to the "Troubleshooting" section of the User Guide on the
Installation CD-ROM.
Windows 2000
• Click Windows Start, Settings, and then Control Panel.
• Double-click the Phone and Modem Options icon.
• Click the Modems tab. Make sure that your new U.S. Robotics
modem is selected. If you do not see a description of your modem,
see the Note at the end of this section.
• Click Properties.
• Click Diagnostics tab.
• Click Query Modem. You should see a series of commands and
responses from the modem. This means that the installation was a
success. If you do not see commands and responses, shut down and
restart your PC. To determine if your modem is functioning properly,
repeat the steps above. If your modem is still not working, refer to the
"Troubleshooting" section of the User Guide on the Installation CD-
ROM.
Windows Me, 98, 95
• Click Windows Start, Settings, and then Control Panel.
jack on the modem and into the telephone wall jack. Use the
9